how to uninstall laptop notebook full？
Please refer to the following steps for how to disassemble the laptop screen:
Use a screwdriver and tweezers to remove the laptop notebook full from the computer chassis.
Then use a screwdriver to unscrew the laptop notebook full fixing nut
Finally, use pliers to unscrew the fixing nuts of the laptop notebook full.
how to uninstall laptop notebook full？
Laptop screen disassembly is an important part of laptop disassembly and maintenance. On a laptop computer, the disassembly of the LCD screen is relatively simple. Generally, the operation can be carried out by tearing off the protective film on the screen. However, the protective film of the LCD screen is not static. If the computer is not used for a long time or the laptop is often moved, the protective film on the LCD screen may be damaged. Therefore, it is necessary to replace the screen protective film in time.
1、 How to remove the laptop notebook full
1. First, we should prepare the tools: screwdriver and tweezers. Then, remove the laptop screen from the computer chassis.
2. Then use a screwdriver to unscrew the fixing nut of the notebook display screen; In case of tight conditions, gently hold the display screen shell with your hand to shake it.
3. Finally, use pliers to unscrew the fixing nuts of the display screen. It should be noted that you must be careful during installation to avoid damaging the monitor or causing water ingress into the motherboard
2、 How to replace the laptop notebook full
how to uninstall laptop notebook full？
1. First, we need to find a removable desktop computer (preferably a removable hard disk), and then open the chassis cover and take out the optical disk drive or optical disk and other accessories inside. Then use a cross screwdriver to adjust the screw position on the optical drive (the specific operation method is as follows). When it is adjusted to a certain height, use a cross screwdriver to adjust the position of the fixed bayonet on the optical drive to complete the adjustment.
2. Next, we need to insert the screen to be replaced into the CD drive; Be careful not to use too much force to damage the LCD screen!
3. After we successfully insert it, we can start the installation. We can see a small hole on the screen. At this time, just aim at the small hole and press it. (Note: Since different models of computers may have differences, the specific installation steps should be determined according to the actual situation.)
4. The last step is to start the machine and test whether it can be used normally! If there is no problem, you can use it directly
